Cars have become an integral part of our lives. We rely on them to take our kids to school, take us to work, and any other place we want to go to. However, imagine how frustrating it can be when you are in a hurry to leave, and your car won’t start. To make matters worse, there is no other car nearby to help you jump-start yours. What do you do in this situation?
Well, a dead car battery is a common issue among many motorists. It occurs when you start your car, but it doesn’t ignite. Several things can cause this problem, including a broken cable connection, gas shortage, malfunctioned fuel pump, etc. However, the main cause is usually a faulty battery.
So, is it possible to start a car without another car? The answer is yes. If your car won’t start, there are several ways you can ignite it. But always ensure that you are not jump-starting with a cracked battery or a visibly leaking acid. Here is how to start an automatic car with a dead battery without another car.Enter your text here...
#1. Push Starting Method
This is a simple way of starting your car. It involves you pulling or pushing your vehicle until it picks momentum. Usually, automatic car owners are not advised to use this method since they can’t be sure of how fast their car can go. Plus, it can also cause damage to the brakes.
But, when you don’t have another alternative, the push starting method can come to your rescue. Here are the steps to follow on this method;
• Set your car’s start key on position
• Look for someone to push it from behind until it gains momentum
• Release both hand-brake and footbrake simultaneously when your vehicle gets into motion
• Confirm that its gear is on drive and carefully step on the accelerating pedal
If everything looks okay and you’re at a stable speed, you can then start the ignition. But be gentle with the gas. Eventually, your car’s battery will be fully charged, and your vehicle can start working again.
#2. Use a Jump Starter Battery Pack
Jump starter battery packs are handy when you experience a flat battery. Most times, car drivers will be quick to purchase a new battery once their old one becomes non-functional. However, before using all that money on a new battery, try bringing your current to life using a jump starter pack. Here are the steps to follow;
• Prepare your vehicle by killing the start, then switch your gear to “park” or “impartial” mode. Doing this ensures that the brakes will remain intact. Then, turn off your radio and lights and reach your battery.
• Next, fix the jump start battery. Identify a suitable place on your car’s battery that allows starting the engine with ease. Place the red jumper clip on the red terminal (positive) and the black clip (negative) on the black terminal. Kick start your battery, then give it some time to power up your vehicle. Make sure that the jumper clips remain intact for the battery to recharge to full level.
• You can then start your car regularly. But ensure that its gear is in park or neutral mode. You’ll hear your engine roar once the battery gets enough charge.
• Once your vehicle starts working, you can disconnect these cables immediately. Remove them while the motor is on so that your engine won’t power off again. Detach the black cable first, then the red one.
Bear in mind that the jump starter needs to have charge. Otherwise, it won’t help you. So always charge it to prepare for an emergency. Also, remember that some batteries don’t mark positive and negative ports. In that case, it would help to have the user’s manual with you.
#3. Start Your Dead Car by Tapping the Starter Motor
Everything wears out with time, including your car’s starter motor. If it’s failing, it may not start your engine. However, a simple thing as tapping it can come in handy. Here is how to do it;
• Confirm that your battery is in good working condition. Then switch the headlights on and try starting your car. If you notice that the lights are dimming, it could be that you have a faulty battery. However, if they’re bright, you’re good to go.
• With a good battery, proceed to locate the starter motor. It should be between your car’s engine and its transmission. Additionally, identify where the thick cable’s route from the battery’s positive to your starter.
• Tap your starter motor several times, then try starting its engine. If you have someone around, let them turn on the start key while you’re tapping this motor. But always ensure that your car gear is on “park” mode before starting it. You can tap using a non-metallic object. Please keep away anything metallic from your vehicle’s battery cable that’s attached to the starter.
The other method on how to start an automatic car with a dead battery without another car is by charging your battery using a battery charger. However, this calls for investing in a fast charge to charge your battery quickly. Fast chargers take approximately thirty minutes or less. But, if you aren’t in a hurry, a trickle charge can also serve this purpose.
Conclusion
It can be a nightmare when you try to start your car without success. However, a dead battery is not anything new. But you can be worried about what to do if there is no one else around to help you. Thankfully, the above are tips on how to start an automatic car with a dead battery without another car.
But make sure you follow safety measures when working on your car. Before you try to jump-start, confirm that the battery is in perfect condition. Also, when connecting jumper links, please be careful to connect to the right terminals. Otherwise, a wrong connection can cause a short burst, which damages your battery further.
Again, when starting your automatic car, always ensure that your gear is on” neutral” or “park” mode before starting. Note that your vehicle could speed up if it’s on “drive” or “reverse” mode, which can cause more damages.
Lastly, if you have tried all these methods and your car won’t start, your last option is to find a mechanic to fix it.